Setup POS Printer/Peripherals Configure
Setup Kitchen Printer interface allows user create Kitchen Printer and allow user to assign PLU item to Kitchen Printer at Setup PLU, for printing kitchen order.
In order to access Setup Kitchen Printer interface:
Main Menu > Setup POS > POS Printer/Peripherals Configure
General Tab
| Parameter | Description | Required |
|---|---|---|
| Name | Name or the description of the object. | Yes |
| Printer Type | The type of the printer/peripherals kind.
|
Yes |
| Port Type | Printer/Peripherals interface type.
TitaniaPOS able to connect to device with specific interface type:
|
Yes |
| Connected To POS | The Printer/Peripherals which the POS terminal device from. | Yes |
| Backup Printer | Print to Backup printer/peripheral device in case the current printer/peripheral failed to connect or transmit data(such as printing) | No |
| Lines Feed | Print extra lines after document printed.
Default value is 5 |
Yes |
| Length Per Line | Maximum characters per line. This option only available if Printer Type set to ESC/POS Compatible.
Default value is 32 |
Yes |
| Character Encoding | Set printing character encoding type. This is for print specific language text to specific printer character encoding type, and is only available when option 3 is disabled.
Default is us-ascii |
Yes |
Option Tab
User can enable or disable certain options to make cashier operation different. Please refer the table below for more details of each option does.
| Option | Description |
|---|---|
| 2 - Device is Disabled | Printer/Peripherals is disabled. Any communication or data transmission with this device will be ignore. |
| 3 - Rasterize Print mode instead normal mode | Receipt, Kitchen, and Order Check Printing will be print in bitmap rasterizing mode instead of printer type character fonts. |
| 4 - Alternative Font Type (Normal Mode Only) | Use Font B type instead of Font A type when printing Receipt, Kitchen, and Order Check Printing.
Note: Option 3 must be disabled |
Advanced Tab
| Parameter | Description |
|---|---|
| Send Special Command Before/After main content | This parameter allows TitaniaPOS to send specific hexadecimal command set before or after the data transmission.
Hexadecimal format should be hexcode(without 0x in front of it) separate with comma. Example: 1B,40 |
| Raster pixels per chunk | This parameter allows TitaniaPOS to send specific chunk size for rasterize image. Due to Rasterize command without CRC checksum, setting this to above 0 will make the system tries to recover the corrupt transmission for raster data instead of full junk data. |
| Raster Font Size Scaling | This parameter allow to set overall font size for the raster image. The adjust is based on the scaling of the image size.
Bill - Receipt bill size Bill Font Width - Receipt bill font size width Order Chit - Order Check List Ticket size Order Chit Font Width - Order Check List font size width Kitchen Bill - Kitchen Order Ticket size Kitchen Font Width - Kitchen Order font size width |
