Setup POS Terminal System

Setup POS Terminal System interface in landscape mode

User able to configure individual POS Terminal option, assigning the connected printer to POS, balance type, second display and so on.

In order to access Setup POS Terminal System interface:

Main Menu > Setup POS > POS Terminal System

General Tab

Parameter	Description	Required
POS ID	The POS ID or its Hardware ID that the object current assigned. This parameter cannot be change and is read only.	Yes
POS Version	The software version of the POS are using. This parameter cannot be change and is read only.	Yes
Name	Name or the description of the object.	Yes
Default Price Level	The default price level to be use for the whole order	Yes
Receipt Printer	The receipt printer for the bill to be print into.	No
Receipt Settlement Print Count	The duplicate copy of the receipt printing after the transaction has been paid. Set to 1 for default 1 copy.	Yes
Cash Drawer	The cash drawer that the POS system connecting to.	No
Pole Display	The pole display or customer display that the POS system connecting to.	No
Order Chit Printer	The printer for the order chit checklist printing.	No
Balance Type	The sales balance type. User able to hold sales temporary using balance function. Type Description Disabled The balance function is disabled. Sales transaction is in direct mode. Open Entry User able to enter any balance number to hold the sales transaction temporary. Balance number up to 5 digits length Floor Layout User able to set user defined Floor Layout, and use it to hold sales transaction temporary. Auto Sequence Balance The balance number is automatically sequence on each time sales transaction complete	Yes
Default Layout	The default layout to be present to user when user launching Cashier function. This parameter must assign when using Floor Layout as Balance Type	No
Floor Layout HotKey Button	User able to set up to 2 Window Layout hotkey on the Floor Layout screen interface.	No
Bill List Font Size	The font text size on the cashier order listing screen. Note: Device screen resolution and its PPI(Pixel per Inch) density plays major roles on font size scaling. Note: The font size might be different when user's Android font size setting is set other than default size.	Yes
Bill Window Size	The separator for the cashier order listing screen and the main window size in percentage. Lower value makes cashier order listing screen size smaller while in the same time main window size increase.	Yes
Main Window	The main window layout screen on the cashier ordering screen.	Yes
Group List Window	The group object listing window layout. Set parameter with any value other than (None) will show group list on the cashier ordering screen. The placement of the group object listing is based on the Navigation Style type.	No
Main Window Size	The size between the main window layout and the group list window + Department/PLU layout size.	Yes
Dept/PLU size	The size between Group List Window and Department/PLU layout size	Yes
Navigation Style	The navigation style for the cashier layout design. Style Description Example Layout Placement Top Group, Bottom Main, Popup Dept/PLU Window The Group Listing Window will be placed on top on the Main Window Layout, with the Department or PLU object listing as Popup dialog interface. This is default design. Top Group, Middle Dept/PLU, Bottom Main The Group Listing Window will be placed on top, Department or PLU object listing on the middle, while the Main Window Layout on below of the Department or PLU object listing. Top Left Group, Top Right Dept/PLU, Bottom Main The Group Listing Window and Department left placed on side or PLU object listing will be placed right side. Both of these Listing Window Layouts will be placed above the Main Window Layout. Bottom Left Group, Bottom Right Dept/PLU, Top Main The Group Listing Window and Department left placed on side or PLU object listing will be placed right side. Both of these Listing Window Layouts will be placed below the Main Window Layout. Left Group, Middle Dept/PLU, Right Main The Group Listing Window placed on left side, Department/PLU object listing placed on middle, and the Main Window Layout placed on right side.	Yes
Payment Window	The payment window layout for the function type Payment Screen	No
Default Dept Pulldown	The default department listing pulldown window for the pulldown of the group's department when there's no specific pulldown window assigned onto the group object. When there's no window assigned onto this pulldown, the system will use item listing.	No
Default PLU Pulldown	The default PLU item listing pulldown window for the pulldown of the department's PLU item when there's no specific pulldown window assigned onto the department object. When there's no window assigned onto this pulldown, the system will use item listing.	No

Option Tab

User can enable or disable certain options to make cashier operation different. Please refer the table below for more details of each option does.

Option	Description
1 - Auto Select Last Item	The system will auto select last item on the ordering list.
4 - Disable Immersive Mode	Disable fullscreen mode on the Cashier screen. This will make the Android system navigation bar and notification bar visible. Enable this option if your Android system does not support Immersive mode.
13 - Ask User for confirm Payment selection	When user tries to finalize payment, the system will present a confirmation of the payment object
14 - Wait User to print another copy of receipt	The system will wait for user to print another copy of receipt. This option will work only if Receipt Settlement Print Count is more than 1
15 - Ask User to print bill if Receipt Printer has turn off	The system will ask user to whether print receipt or not after bill finalized. This option will work only if there's Receipt Printer assigned on to the POS Terminal
16 - Enable Second Display	Show customer display on the second screen display. Required system device with second display connected.
17 - Don't trim item name on receipt	The receipt will print full length of the item name. This will cause the receipt paper print more than 1 line per item
18 - Reset Price Level on each item	Reset back to default assigned price level on each item ordered instead of each transaction.
19 - Don't trim item name on display	Show complete item name on the Cashier ordering list screen, instead cut with ending ellipsis(...) on the item name
20 - Skip Set Menu Selection Confirmation	When the set menu order completes, the system will not prompt for user confirmation for continuation or re-edit.
21 - Show Name2 on display	Show PLU Item Name2 on the Cashier ordering list screen.
30 - Back Button as Exit Cashier POS	The Android back button will act as exit TitaniaPOS system instead of goes back to main menu.
31 - Don't close all Pop up Department Window after PLU selected	The system will not close department window pop up dialog screen after any PLU item selected. User have to use Close button to close the dialog screen.
32 - Don't print any KP Cancel on Bill already settle	The system will not print any kitchen order with cancel item if the transaction has been finalize and do bill cancel.
33 - Prioritize Drawer printing over Bill printing	The system will send open drawer signal first before printing any finalize receipt on the same printer.
34 - Print Bill Time as Bill Closed Time	The system will print the date/time using Bill Closed Date/Time on the Printed At section instead of Bill Open Date/Time
35 - Don't print Condiment item on receipt	The system will not print any condiment item on the receipt.
36 - Don't print Condiemnt item with 0 price on receipt	The system will not print any condiment item without price on the receipt.
37 - Don't print Condiment item on Order Chit	The system will not print any condiment item on the receipt.
38 - Don't print Condiment item with 0 price on Order Chit	The system will not print any condiment item without price on the Ordering Chit
39 - Group Similar PLU on Receipt Printing	The system will tries to group any PLU item with same PLU item.
42 - Show Department instead of Group Listing	The system will show Department objects on Group List Window instead.
46 - Show Direct Order Button Floor Layout screen	The Floor Layout screen dialog will show direct order button for instant order without any balance.
47 - Enable PLU Daily Quantity Limit function	Enable the PLU item daily quantity order limit function. Enable this function will required slightly system resource and might slow down the system.
48 - Print Unit Price at PLU's Name on receipt	Print unit price at the PLU item name during receipt printing.
50 - Print Price Level Name on receipt	Print price level name at the PLU item name during receipt printing.
51 - Print Price Level Name on Order Chit	Print price level name at the PLU item name during Order Chit printing.
55 - Print Condiment Quantity on receipt	Print condiment quantity during receipt printing.
56 - Print Condiment Quantity on Order Chit	Print condiment quantity during Order Chit printing.
57 - Print Name2 on receipt	Print PLU item's Name2 during receipt printing.
58 - Print Name2 on Order Chit	Print PLU item's Name2 during Order Chit printing.
59 - Print Price on Order Chit	Print PLU item's price during Order Chit printing.
60 - Show Balance Info instead direct open it	The system will show user balance information dialog screen when user tries to open any existing balance transaction.
61 - Show Barcode Input instead popping up	Instead show pop up screen for when user type or scan any barcode, the system will show barcode text input box on the Cashier main screen interface.
62 - Don't Show Soft Keyboard on Barcode Input(Required Option 61)	Don't show software/virtual/on screen keyboard when user click/tap on the barcode text input box on the Cashier main screen interface. Enable this will required user to use physical keyboard or barcode scanner to type/scan the product code.
63 - Show Balance Entry on Payment screen	Show balance entry button on payment screen dialog interface.
64 - Sort PLU Item order by PLU's Display Sequence on Order Chit	Sort the PLU item order based on its display sequence configuration on the Order Chit printing.

Advanced Tab

Parameter

Description

Second Display

Secondary Display option and design, also known as Customer Display Parameter Description Greeting Message the greeting message text on the secondary display. Auto Clear Finalize Screen set the timer(in second) for auto clear out finalize screen(change due and total amount) PLU Item auto clear Timer set the timer(in second) for auto clear out the PLU item image on the advertisement screen. Shop Banner The Shop banner left side bar image. Regarding the size of selected image, the system will auto resize to scale to fit on the side bar. Video/Picture Path This parameter is read only, and is for indicate where the system will look for the images/videos for second display advertisement. Make sure to place all the images/videos that user wants the system to display the advertisement. Supported format: Image Type JPG, BMP, PNG Video Type MP4(video playback is based on Android system supporting) Picture advertise duration The duration length(in second) of the image type advertisement to be display before switching to next advertisement. Options Option Description Shuffle Video/Picture Advertisement Random playback the advertisement instead of sort in order by filename Enable Video Advertisement sound Allow to play sound on the video type advertisement. Show Total only on Payment Screen The system will only show total amount on payment screen only.